-
Cleaning garage out, misc parts available
Most of this is from I was working on our 2001 launch ss22v. Some things new, some less than 10 hours usage, a couple old things.
Would like this stuff gone to someone who can use it, make any offers.
Manifold Gaskets
![](http://uploads.tapatalk-cdn.com/20160424/8e73ed97216d314d124cb9f3315fa15a.jpg)
Remote oil filter - one kit, one new unused filter holder (wrong size), one older holder
![](http://uploads.tapatalk-cdn.com/20160424/3e0e2e60074e768253928bbfbc608c35.jpg)
Dipstick
![](http://uploads.tapatalk-cdn.com/20160424/51b50f66c58fad0aad255b0dd272ce7f.jpg)
Timing Cover
-
Wake plate with misc hardware
![](http://uploads.tapatalk-cdn.com/20160424/b3f251f8c94d61966fd8bb3c66f67977.jpg)
Tower clamp fittings (came with monster tower mirror arm)
![](http://uploads.tapatalk-cdn.com/20160424/75bb78ae3f01d3d5db109cbafd665847.jpg)
Three rocker switch holder
![](http://uploads.tapatalk-cdn.com/20160424/599a1fa8c4697ad5f2af32b5362ce16b.jpg)
Timing shunt
-
Cleaning garage out, misc parts available
Oil drain hose - about 6 ft
![](http://uploads.tapatalk-cdn.com/20160424/10acf40689141c86b013453444a98c70.jpg)
Speedo adjuster
![](http://uploads.tapatalk-cdn.com/20160424/0911a58815d4949a18cff9f60a10f95d.jpg)
Thermostat and gasket - SOLD
![](http://uploads.tapatalk-cdn.com/20160424/644417f463465385919366a199aec6da.jpg)
Paddle wheel install kit (minus paddle wheel unit itself)
Last edited by 99bison; 04-26-2016 at 12:09 PM.
-
Two fly high ballast distribution manifold with 1 to 1 1/8 quick connect fittings, used one summer, https://www.wakemakers.com/fly-high-...-manifold.html
![](http://uploads.tapatalk-cdn.com/20160424/963837d631ae1ac1fa25ea726554b20b.jpg)
Old school wakeboard fin
![](http://uploads.tapatalk-cdn.com/20160424/0de25cb9a98941a60fc8d4b48cfbe46b.jpg)
Worn swim platform brackets, 3 arms, 2 receiver sides, not sure anyone would want this, but hey it's here
![](http://uploads.tapatalk-cdn.com/20160424/5d2dbcb5e4020981991e99c0d01c6985.jpg)
Ballast tanks
-
Valve covers, the short ones, polished aluminum but still to high for my new manifolds
-
Thanks for posting these items.
Where were the hard ballast tanks installed? In each of the back storage lockers?
I would also be interested in the ballast manifolds as well.
Thanks, Bill D.
-
Yes, the tanks were in back storage lockers. I think they are 250lbs each.
-
Do you have any close up of the platform brackets? Any measurements?
-
I'll take some pics and measurements of the brackets and post on here
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules