1988 Saltare starting issue

[cadunkle]

You should have a wire in that vicinity (or closer to the coil) that is hot in run and start positions, that goes to your coil. Another will be hot only in the start position, that goes to the small terminal on the starter solenoid (smaller cylinder on the starter). You'll also have a large cable around 1/0 or 2/0 maybe to the starter, I think mine is 2/0. I can try to get you a picture on the wires at the starter on my PCM 454, probably Friday.

Also, interesting driveshaft isolator. Wonder what the story behind that is, I'd guess to allow minor misalignment. It's not factory.