-
Originally Posted by
Mischief IV
This is the product I used to replace the window vent handle. It works. However, be prepared to drill out the aluminum (thankfully) rivets that affix the original bracket to the window frame. Note that the replacement bracket does NOT line up with the existing holes, but it is close. I used self-tapping screws to affix the new bracket with great success.
Side note, the metal retaining ring that secures the plastic "nub" to the actual window is a huge pain to get off.
As far as replacing the window itself is concerned, you will probably have to get a local glass shop to cut you a replacement.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Reply With Quote