Inheriting 1989 Supra Comp TS6M

[codemonkey82]

All, I know this is a very old thread but I have finally been able to get the stringers and floor boards replaced and have new leather going in now. I will be putting the engine back in the boat on Friday. I have a few questions about the engine/engine parts. I hope that posting in this old thread is ok.

1. Does anyone have any detailed pictures of the engine in this model boat? I received the boat after all the hoses/wires had been disconnected. I am specifically looking for the hoses going from to the transmission cooler, to and from the water pump (with the impeller).
2. When I put the motor back in the boat how can I tell how far back to put it? I assume just matching it where the exhaust hoses from the engine that meet the stainless exhaust tubes will work?
3. I need to replace the transmission cooler, where can I find this part?
4. I need to replace the external fuel filter/housing, where can I find the parts?
5. When I attach the throttle cable what position should the transmission shaft be in when the shifter in the straight up neutral position?
6. Is anyone aware of a how-to video in regards to the steering cable connecting to the steering wheel for this or similar models?