Hey man, Engine and trans will have to come out as an assembly. Split the bell housing from the engine and slide the trans input shaft out of the coupler and flex plate. This job will run you $1300+ at a competitive dealership. If you have a good manual and a way to lift the powertrain out, you can definitely do this yourself. If the leak is coming out of the case or housing gasket the trans will have to be split in half.
If you have any questions, I will be happy to answer them...
Last edited by Irish_Jack; 06-07-2009 at 10:57 AM.
1992 21 Sunsport
PTI Boss GT-40 351 w/4011 Holley 750DB
O.J. 14X16 1.02 cup 3rh