does anyone know if there is any easy way or access to tighten bolts on towers
does anyone know if there is any easy way or access to tighten bolts on towers
what boat do you have?
I have tightened mine but it is easier with 2 people but quite simple
2009 21v Worlds 340 Cat
run your engine after you change the oil
Doug
I have a 2006 20ssv launch
I have an 06 24 and have accessed the nut on mine through by pulling out a cockpit speaker. Not sure if you could do the same, I know we have a different layout.
Which ones are you wanting to tighten?
the front ones are easy to access on my boat, the rear i can get at by removing the seat cushions and reaching up behind the side panels and use a deep socket with a straight driver
2009 21v Worlds 340 Cat
run your engine after you change the oil
Doug
I have the 20ssv and had to pull out a speaker on each side. easy one is behind the drivers seat. the tower bolts on the pass side are a biotch to tighten and even get to. def. a 2-person job...
good luck