2000 LAUNCH, need to change tranny fluid & never done it. Also how do I clean/replace the tranny filter and/or the tranny housing where fluid runs around the intake water for cooling? How mant qts? TIA
2000 LAUNCH, need to change tranny fluid & never done it. Also how do I clean/replace the tranny filter and/or the tranny housing where fluid runs around the intake water for cooling? How mant qts? TIA
http://www.moomba.com/msgboard/showthread.php?t=10977
look in your manual or print one of from the downloads on this site. no need to clean your tranny cooler
2009 21v Worlds 340 Cat
run your engine after you change the oil
Doug
Tranny is a ZF Hurth Model HSW 450 D- Is filter screen inside the return line connection? Not the same configuration as MOOMBA site directions. TIA
ok this is the same tranny , the screen is in the tranny on the bottom. feel for the rectangular coverplate with 2 bolts on the bottom of the tranny, if you have your manual it will show you in the diagram where that screen is located. The ? is whether you have evough room unred the tranny to remove it. you need about 1.5 inches of free space
2009 21v Worlds 340 Cat
run your engine after you change the oil
Doug