reverse not working on '86 351 PCM

[Eric1687]

The same thing happened to my transmission. I printed a manual off for the transmission and it had a step by step process of taking it apart. I replaced all the clutches while i had it apart and the damper plate. There are some pictures of the rebuild on my profile. Wasnt a bad rebuild with the manual.

[rlhahn]

Thanx! This will help.

arrghh! link cut short again, 2nd try, you'll have to paste these two lines together:
http://l-36.com/read_pdf.php?file=manuals
/Borg-Warner-71C-72C-Transmission-Manual&title=%27Borg-Warner%2071C-72C%20Transmission%20Manual%27

[rlhahn]

Will do. Thx.

reverse clutches...just make sure you mark pump,the pump is for either rotation motors.i put mine in wrong spot when i installed my clutches and had nothing,easy fix put had to remove tranny again.so make sure you mark it before you remove it