Quote Originally Posted by Supra_Comp View Post
I think I will 'jump' into this as well,.

Titan, were you only having issues on startup? My comp had some bad heat soak with the old motor (no idea how the new motor will be). But I would have hard starting, fuel bowl drainage and after numerous pulls it would buck and bog like crazy.

Was that the pipe from the carb to the fuel pump? Is your fuel line from the tank to the pump rubber?
I only have issues when I get the engine hot and then shut down for more than 30 minutes without cracking open the doghouse. If it's less than 30 minutes, or if I crack open the doghouse, there are no issues.

The metal pipe that I wrapped is from the pump to the carb. The fuel line from the tank to the pump is rubber.