Thanks guys. I'm really proud of it and the fact that I didn't break the bank to get it done. Anyone can throw money at a problem and fix it, but I like to torture myself with my own cheap labor.


Quote Originally Posted by Salty87 View Post
looks fantastic!

how hard is the pinstripe on the hull? that's a long run to keep 'straight'.
It's not too bad if you use a reference line. I used some painters masking tape and laid it down directly below where I wanted the pinstripe. It's easier to keep the thicker tape straight. You then come back and lay down the pinstripe along the edge of the masking tape. Although I was nervous about getting the line straight, I think it turned out pretty good.