Building your own underwater Led

[jasun]

http://www.scuba-tutor.com/dive-phys...absorption.php

absorption-color.jpg

Whenever I get mine done, Ill take some pics

[Sdc77]

Jasun good replication looking. Some bubbles left. Maybe your resin is not adequate to do this job. On the packing we understand it's more a protection resin than a real inclusion resin. "INCLUSION" resin is made for this thick job. In general you have no any bubble after pouring. I can't find it in english on google, even when I tape "epoxy inclusion resin", I only find french website with this search. Maybe I didn't translate it properly ?

Inclusion resin does those things :



Anyway, your led will work just fine.

Good link above, I didn't know about water absorbtion. But with our leds, we don't target a 20' brightness, so the red ones will be more powerful than my blue ones.
So don't worry man !

When I fixed it to the boat, I used hard house electricity wire, as you can get the target you want (almost). You start from the outside of the boat and you push it with a hook form behind the tank. Then you use tape on your leds wire attached to the hard wire and you pull it

Keep posting, I'm really curious to see it in water

[villain]

Lookin great!! Can you let me k ow where u ordered the black buckets from? I prolly missed it in the thread somewhere I'm sure.


Sent from my iPhone using Tapatalk 2

[Sdc77]

villain, look at the first page and message of this thread, I edit my post, there are links for leds and black buckets (just Under the bucket picture)

[Cusefan78]

So I'm trying this now. I just ordered the cups and the bulbs. I went with blue. My only question is will the epoxy you put on Bartops work. I'm in the same boat can't find that inclusion epoxy either

[NorCalPR]

Something like this?

http://www.amazon.com/Pebeo-Gedeo-Cr...nclusion+epoxy

I would imagine you'd be able to find it at a crafts store like Micheals

[Sdc77]

NorCalPR, this resin should be fine.
It's epoxy, crystal clear and for modeling.

As soon as somebody find the perfect resin to do it, like the link above, I will edit my first post with it. This way everybody will be able to replicate with all necessary stuff.

Good luck with replications guys

[Cusefan78]

How about this stuff?
http://mobile.walmart.com/m/phoenix;...16oz./12356345

[Sdc77]

Your link doesn't work on my PC Cusefan78

[Cusefan78]

Sorry here's a photo of it.
image.jpg