Results 1 to 6 of 6

Thread: VSR Grounding

  1. #1
    Join Date
    May 2021
    Posts
    5

    Default VSR Grounding

    Hello,
    Where should I attach the ground wire from my VSR? I have a 2011 22v Sunsport. I have read a couple of posts that have said to attach it to the negative terminal of my starter battery. Do people agree with that?

    Thanks!

  2. #2
    Join Date
    Apr 2012
    Location
    Lake Wylie NC Area
    Posts
    440

    Default

    All grounds are common.
    Michael
    Mikes Liquid Audio

  3. #3
    Join Date
    May 2021
    Posts
    5

    Default

    Mike,
    I apologize for being a newb but what does that mean? Where should I attach the wire?

    Thanks,
    Kit

  4. #4
    Join Date
    Dec 2013
    Posts
    645

    Default

    What's a VSR?

    What Mike is trying to say is the correct answer normally is the easiest ground to reach from where the component is located. At the rear, anything on the engine block, left front the battery, and under the dash any common ground wire.

    If the VSR? is high current, then it will take some care to provide a substantial enough cable to ground to.

  5. #5
    Join Date
    May 2019
    Location
    Arizona
    Posts
    200

    Default

    Quote Originally Posted by CJD View Post
    What's a VSR?

    What Mike is trying to say is the correct answer normally is the easiest ground to reach from where the component is located. At the rear, anything on the engine block, left front the battery, and under the dash any common ground wire.

    If the VSR? is high current, then it will take some care to provide a substantial enough cable to ground to.
    Voltage sensitive relay. I had to look it up.

    Looks like the ground goes to a common bus bar and not necessarily the battery.

    I just found this schematic

    https://productimageserver.com/liter...al/58652OM.pdf


    Sent from my iPhone using Tapatalk

  6. #6
    Join Date
    Apr 2012
    Location
    Lake Wylie NC Area
    Posts
    440

    Default

    Quote Originally Posted by kithagen View Post
    Mike,
    I apologize for being a newb but what does that mean? Where should I attach the wire?

    Thanks,
    Kit
    Electrically, all grounds are connected to each other.
    Michael
    Mikes Liquid Audio

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •