Printable View
mspaint... you might have to type it in on your start menu search bar.... I see what I can do.. I just got home and haven't seen the fam all week...but I know your in a hurry.Quote:
Originally Posted by lively
Just have to figure out what the heck daff is talking about????? :)
try this
Attachment 9811Attachment 9812Attachment 9813
not sure if the 3rd one is what daff was talking about... can you get a shot directly from the side?... ant take the guard off the back of the trailer?
Maybe I should have left the rub rail off???
The last one is close to my idea. I think if all the black outlines were removed and the orange went to the bottom of the hull al would be good.
ha ha ! guess what ? so i picked some of the interior up and set it in the boat ... annnnddd needless to say the grey on grey is totally off .. so i talked to the painter and he said he could match it up and get r done , there was no way in hell i would drop it in the water with those two greys lol .. but i have faith it will all come together ..
carpets in and wiring started , i have to wait for her to return to finish ...
will see what I can do later.... it's laterQuote:
Originally Posted by DAFF
you mean like this?
Attachment 9820
ding ding ding ding !!! round 2 of the paint job lol .. jeez man id really like to kick myself sometimes ... base coat / clear coat .... and they are re spraying the grey to match the interior ... and i ling it done like the pin striping ideas .. !! considering having it done there .... idk yet ... but the interiors done and looks good ...
so i talked with the painter today and sounds like things went right this time around ... he said they will be buffing Saturday morning and i can come pick it up
in the afternoon .. I did have to pay to change the color grey and the clear , he covered the orange witch is a brighter orange ... and then im headed to the
house to install the engine and rivet and seal the hull ... ill be wiring through the weekend and hopefully have a lake test by Monday .. i am in no rush so im
taking my time with making solid connections with all the new hardware .. but i thought i would share my plan with yous guys and to say Thanks to fellow
serviceman for all the hard work !!
good to hear can't wait to see the pics! :D
awesome! pics will make me even more jealous!
hey guys ! well i got the motor in and fired up but i cant seem to turn her off .. lol so does anyone have dash schematics for the ignition and gauges .. i wrote down all of this before i disassembled but i lost the most important one .. can some one email or text me [email protected] or 817 996 3051
thanks for the help
87 sunsport
Check the coil for power ..... I think you key is running power to it constant and not through the switch....
ok i got is this secondary orange wire that comes out of the rear harness (orange ) witch checking ohms rings out to the output on the alternator but in the main plug there is a orange
wire that goes to the (S) of the volt meter ? do you have a pic of your breakr setup and resistor ? also my choke is not getting power to close when i start
this is what im talking about http://i1189.photobucket.com/albums/...6/0a8730c2.jpg
and here is it running http://s1189.photobucket.com/albums/...t=a39b9ad5.mp4
and yes that was a scratch on my new paint ... ugh ... decal will do fine
I have the orange wire in the main harness ran to the signal lug on volt meter and a power wire coming off the same lug to the fuse panel for my switched
Accessories.
So with the extra orange wire I checked continuity from output on alt from harness as well
as the extra one and they both ring out so they are deft spliced at some point. .. so
I still need to fine out if it is actually charging ...but my alt has a one wire output (orange) and one ground
When I put the orange wire directly on the + for the seloniod it pegs the volt meter acting like its grounding
other than that it runs and turns off by key and gauges are working besides the oil press .... any input on this
Would help me a lot ..
Any thoughts ???
I'm really hungry..... lol
best I can do is check my engine when I get home..... tomorrow.
yeah just look at ur voltage gauge what is terminated on the signal post and where that orange output ties into.. thanks budQuote:
Originally Posted by wiatowski
no problem....Quote:
Originally Posted by lively
No body loves me :( ! Lol I just want ti charge me battery! ! And read it! !
I don't have a voltage gauge just amps.
Ok but on the rear of the motor . Where is ur secondary orange wire terminated .. if it even is
as far as I can tell nothing... its taped off.Quote:
Originally Posted by lively
here's the pics.Attachment 10046Attachment 10047Attachment 10048
Yeah idk I might have wired it wrong .. lol I talked to Vince at skidim. And if u have an amp meter that is how its to be wired
but in my case that with a volt meter it goes to the input for the breaker and the little red wire goes to the postive lead comeing in.
And that is what charges the battery but I don't get it ... I did that and the damn volt meter still pegged out .. oh well ill look at it when I
get home ... just so much going on .. I don't need hold ups like these ... thanks fit the help bud!
hope you find the solution... boat looking good by the way.
Thanks man , its taking alot out of my heart and soul to make this project a success and it's going to be a life learning lesson for
Me , I'm 26 and I'm proud to say that I was self taught with help from supra forum guys out there !
It's like drinking a cold brew after a job well done that makes me go for more !
Congrats on reaching yet another major milestone. Don't forget to do a good alignment on the coupling - it'll help that new tranny last longer. Did you get the engine wiring sorted out? Sorry, no help here - I've got a 454 & no original wiring.
Thank you. I believe it is aligned correctly. .002 top to bottom and side to side how did u do yours? And I think I got the wiring figured out just didn't understand why the gauge was pegging out
Some of us are still on here, but most are out having fun without us man. I still have a way to go too! Stereo, roswell bar, tower wiring. carpet, steering wheel and a bunch of details.
Well I am having new tower feet welded on, I have to finish up all the wiring maybe 2 hrs tops and install interior .. a day maybe .. I plan to be on the water next weekend to lake test and name her
You can name her just dont put it on your boat man. (You can, but you shouldn't) Like "Wet Dreams" or "Eat My Wake" Not cool man..not cool for boats under 24'. Or how bout "Lil Evil" lol. Mine is called the "Endorphine" because she makes my endorphines accelerate and gets me excited!!
Mine is affectionately known as "The Other Woman" - named by my wife. But it's not on the boat.Quote:
Originally Posted by jet
That's a pretty sweet paint scheme - LOVE the colors!!8)
"Lady Lively" / "one vision " / " eat my paint " lol not ... there's so many online that I'm just going to freestyle name her on the docks ... I'm just ready! Lol
looking good! just finished putting mine back on the trailer. :)
Im going to put 4-engines in mine and call it "Four Play" lmao!! My wife calls it the other women also. But wife number #2 never gets mad at me or makes me take the trash out. lol
Reasons why boats are better than women:Quote:
Originally Posted by jet
1: They don't get jealous when you look at other boats.
2: They don't complain when you tie them down.
3: They don't get angry when you look at boat magazines and boat pictures.
4: They come with an instruction manual
5: They have an "on" and an "off" switch.
:D