These are the "nose pieces" I will be adding to the front. A piece of the aluminum tread plate will be welded in here and cut with a curve as well. This will give the front of the tower some depth and allow it to match the curve of the rear hoop.
The tower will be painted purple to match the boat since I already have a bunch of purple paint. I will build a bimini tower at some point in the near future but I am not worried about that at the moment, I'd like to get the boat back together and in the water first.
That tower looks like it is going to be very solid.
Looking good, Luke. This will probably be one of the best looking DIY towers I've seen on the net.
It is Tuesday….![]()
86 Saltare
I was able to paint the top of the boat this Saturday, and it turned out great. I was unable to finish the tower last week due to work, but I can spray that one evening pretty soon without much hassle.
Here is a close-up of one of the gussets with round tubing on the tower:
Top of the boat before paint:
After the first dusting of purple:
After the purple and white were layed:
![]()