Still waiting on Ramp #2, for some reason they shipped separate. It is supp to be in tomorrow, hopefully I can still get a test in before the weekend is up.
Still waiting on Ramp #2, for some reason they shipped separate. It is supp to be in tomorrow, hopefully I can still get a test in before the weekend is up.
2002 Supra Launch 22SSV
ACME 1433 Prop
Ghetto Gate
Never mind lol
I'm dieing to try it but it keeps raining hopefully tomorrow !
Nope just 6 stainless steal boats had to drill 2 additional holes in the center and a bead of silicone around the whole think I would think it should float if not I was thinking of putting a pool noodle inside of it.
You guys should check out this thread:
http://www.mastercraft.com/teamtalk/...t=70442&page=6
-Mike
2006 Supra Sunsport 20V
I took two of the skate board ramps and bolted them together. The ramps have two small holes on the lip of the ramp. Bought two cans of great stuff and sprayed it in to ensure it floats. Also, used the velcro as advertised and this velcro holds very well. Spent about 5 hours surfing and the ramp did not move. I fill center ballast 1125#, 450# in the playpen, both rear lockers at 800#, wake plate up and cruise at 11 mph.
I ended up having to double up Velcro because it popped off and found it bouant enough without putting anything inside of it.
2001ssv