Quote Originally Posted by 87TSComp View Post
A previous poster said with my system I would be pumping the antifreeze and it would be bypassing out of the exhaust until the Tstat opened, thus contaminating my 10 gallons of antifreeze with 5 gal of water.
The other day when I ran the boat on the hose I got maybe 1/2 a gal out the exhaust in the 3-4 minutes it took to open tstat. Thus I wouldn't have to worry about contaminating my antifreeze. Just run it till I get antifreeze out the exhaust then put the buckets under or take tstat out...
Sent from my iPhone using Tapatalk
it takes way more time to take the tstat out than drain the block and 10 gallons of antifreeze is like $40 ....this makes no sense ... plus it takes a good 10-15 mins to get my temp up to 160 and way more than 1/2 gallon.........why why why, no worries, i deal with -40 temps so call yourself lucky