I ran some string from side to side to help with measurements. The starboard side is over an inch and a half lower than the side closest to the hull. The port side is only 3/4".

Speaking of bilge pump, I'm going to have to relocate mine from between the ski plyon and the engine. There is a really low spot in front that is 3" below the area where the plyon is fiberglassed to the hull.

I also got the engine mounts out. Kinda hard to take the lag screws out when there is nothing for the threads to grab onto. Though there might be some life left in them

Sent from my SM-G960U using Tapatalk