Help Wanted!!!

[DAFF]

For the Sunsport Skier sticker under the side window??? Your best luck is for someone to take a high res photo of it for you and bring it in to a sign/lettering place.

[wiatowski]

So my wife accidentally threw out my sticky note with my waterline and wave measurements.... Could someone please measure theirs? Wave H x L? and bottom stripe from the rub rail down... say underneath the rear cleat and under the front of the side vent?


Wanted to post an idea or 2...This is for sure
newlook10.jpg
messing with font
newlook11.jpgnewlook12.jpgnewlook13.jpg
Keep in mind that the grey will actually be chrome, and it will be an actual supra logo on the side. Any thoughts?

[sybrmike]

For some reason, the thin font seems to look juuuust right.

[wiatowski]

For some reason, the thin font seems to look juuuust right.

you mean the 2nd one?

[sybrmike]

yup, the middle one on the bottom - looks right at home with the hull & other graphics

[wiatowski]

#1

#2

or #3

[DAFF]

I like the general look of everything so far. For me none of the three are perfect but a blend would would work. Place the Supra on the back Where the Silver Lake Sports was and try adding a suttle skier to the Sunsport on the side. Something like the originial Sunsport Skier logo by the windshield.

Perhaps it is the angle but the Supra on the side looks out of balance with the rest of the boat to me. Remember less is more sometimes....

[relyt]

That is exactly how my dad's 97 sunsport came from the factory.... Supra by the wave and sunsport by the vent. I pick that way.

[DAFF]

I think the perfect size and font for the Supra on the rear section of the wave is found on your trailer near the front section. This way the boat looks modern but still hold true to its heritage.

[wiatowski]

OK... try these

#6


I know it's hard to see but sunsport skier is on there.
I'll have to say I'm quite partial to #2, 4 and 6... gonna try one more...