Results 1 to 10 of 205

Threaded View

  1. #21
    Join Date
    Aug 2014
    Location
    Orlando, FL
    Posts
    219

    Default Decided to build All Composite Stringers and Floors...

    Quote Originally Posted by lmnelson86 View Post
    Flips, you didn't happen to take a measurement of the placement of the two rectanglur holes cut in the floor where the cables and wire harness pass through, did you? I can't seem to find that dimension in my notes. I have pictures but want to be more accurate. I'm going to make a trip to measure my top deck this weekend, but thought you may have an answer.

    How's your boat coming along? Im excited to see your progress, seems you've been moving quickly. I'm def Interested to see another restored Mariah!

    I actually didn't take dimensions for that. I do know the width of it was just wide enough to have the the wire housing (pipe) to pass though. I just remember it was tight. The location on the floor is right where the built in cooler is and just inside of the longitudinal stringer. I will be working on it tomorrow so I'll see if there are any other references.


    As far as progress on the boat, I have changed directions as far as material. Although I already bought the lumber, I decided to go with wood free stringers. I will be using a mix of 2" thick Nida Core, 3/4" divinycell, and various density foams blocks (I have access to scrap between 2lb and 30lb) for the bulkheads.
    Last edited by flipz96; 07-10-2015 at 04:43 PM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •