Quote Originally Posted by flipz96 View Post
I actually didn't take dimensions for that. I do know the width of it was just wide enough to have the the wire housing (pipe) to pass though. I just remember it was tight. The location on the floor is right where the built in cooler is and just inside of the longitudinal stringer. I will be working on it tomorrow so I'll see if there are any other references.


As far as progress on the boat, I have changed directions as far as material. Although I already bought the lumber, I decided to go with wood free stringers. I will be using a mix of 2" thick Nida Core, 3/4" divinycell, and various density foams blocks (I have access to scrap between 2lb and 30lb) for the bulkheads.
I am very interested to see how that turns out! If I had access to those materials I would give them a try as well. Maybe on the next project. Yeah if you think of it, let me know on those dimensions. I have a bunch of pictures so I remember the size, just want to double check locations.