Page 6 of 16 FirstFirst ... 45678 ... LastLast
Results 51 to 60 of 157
  1. #51
    Join Date
    Nov 2011
    Location
    Paris, France
    Posts
    536

    Default

    Seems to be good !
    Stéphane
    -----------------------
    1989 Supra Saltare

  2. #52
    Join Date
    Jun 2013
    Location
    Syracuse NY
    Posts
    934

    Default

    Ok perfect. Thanks. Ill post pictures after I make and install them. I was thinking about putting three on the transom. One on each end and one in the middle. Thoughts?

    1995 supra labrisa
    Pro boss gt40
    GPS Ridesteady
    Pioneer headunit kicker speakers

  3. #53
    Join Date
    Nov 2011
    Location
    Paris, France
    Posts
    536

    Default

    More led = more brightness
    I can only say "action"
    Stéphane
    -----------------------
    1989 Supra Saltare

  4. #54
    Join Date
    Aug 2009
    Location
    Vancouver WA
    Posts
    1,111

    Default

    Quote Originally Posted by Cusefan78 View Post
    Quote Originally Posted by Sdc77 View Post
    Your link doesn't work on my PC Cusefan78
    Better link: http://www.walmart.com/ip/Environmen...16oz./12356345
    2008 Moomba Mobius XLV. Monster Cargo Bimini, and more mods to come...

    1992 Supra Sunsport. **SOLD** 2k pounds ballast, Surf System, Blue LED's everywhere, decent audio system.


    Tow Rig: 2013 F150 Ecoboost FX4 (wife's rig) Other money pits include:1998 BMW M3 Cabriolet, 2002 Audi S6 Avant, 2005 Kawasaki ZX-6R 636.

  5. #55
    Join Date
    Sep 2009
    Location
    Western PA
    Posts
    491

    Default

    Before poking holes, I would be inclined to use temporary wires hooked to the switch, (so run the wire over the stern), put the lights where you think you want them and see the result in the water you use. Then you would be able to gauge their effectiveness and location. (Move 2 to one spot, spread them out more, etc) All with 2 lights at the time, then determine if you want more or less.
    2004 Supra Launch 22 SSV
    5.7L Indmar Assault
    "One More Hour"

  6. #56
    Join Date
    Aug 2012
    Location
    Wolcottville, IN
    Posts
    761

    Default

    Quote Originally Posted by jzelt View Post
    Before poking holes, I would be inclined to use temporary wires hooked to the switch, (so run the wire over the stern), put the lights where you think you want them and see the result in the water you use. Then you would be able to gauge their effectiveness and location. (Move 2 to one spot, spread them out more, etc) All with 2 lights at the time, then determine if you want more or less.
    I like your thinking... i was debating doing 2 or 4 lights... I think I will velcro them on for a test and see how they look... and see if I need 4 of them.
    86 Saltare


  7. #57
    Join Date
    Jun 2013
    Location
    Syracuse NY
    Posts
    934

    Default

    Great idea I'm going to try that over the weekend

    1995 supra labrisa
    Pro boss gt40
    GPS Ridesteady
    Pioneer headunit kicker speakers

  8. #58
    Join Date
    Jun 2013
    Location
    Syracuse NY
    Posts
    934

    Default

    Just to give everyone a heads up. That dx website is in china it took a week to prepare shipping and its going to take another 2 weeks to arrive at my house. I would avoid that site. There are other sites I found later. I would recommend superbrite.com. Also the dx doesn't have any working numbers either.

    1995 supra labrisa
    Pro boss gt40
    GPS Ridesteady
    Pioneer headunit kicker speakers

  9. #59

    Default

    Anyone ever buy from www.oznium.com ? I have purchased LED's from them for my car with great success. Thought I would throw that out there.

  10. #60
    Join Date
    Nov 2011
    Location
    Paris, France
    Posts
    536

    Default

    oznium doesn't have the 30x5050 SMD Led MR16 (12v) buld.

    For that project, you will need this kind of Led. Oznium sells a mono led marine for $18. It's only 11.7Lm in blue color. My Led is 7 times more powerful for half price and some hand work.

    In France I found a website that sells a 24x5050 SMD led (the one I used). They are made in china but they have leds in stock, so I got it in 2 days.
    Simply find a US website that have it in stock ! You can also check on eBay.
    Stéphane
    -----------------------
    1989 Supra Saltare

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •