Quote Originally Posted by wotan2525 View Post
That foam is interesting and it seems like you know what you're doing. How does it compare in cost to wood?
Its pretty expensive material. About $1K for a sheet of 3'x7'x 6". Luckily, I was able to get my hands on some scrap. Otherwise, I would have used wood.

017b303f45107d17a8028b09adb9f62c3278422655.jpg

The compression strength is considerably higher than wood. Douglas Fir for example is about 400 psi. This high density foam tooling board is 2,185 psi @ 75° and 1,384 psi @ 160°.